MOLDMAK INDEX 2000 PROM | Gun Drills

Description

INDEX 3000 Horizontal Machining Center with Deep Hole Drilling Capacity Rotary table 26 tons - B axis• Stroke of linear axis: X-3000; Y-1500; Z-700; A-30 /17.5 ; W-1650• Numerical Control Fagor 8065 Spindle: 36/54 kW, 8000 Rpm, Torque S1 298,4Nm, Torque S2 404Nm Torque S6 612Nm• Included Accessories Carrousel Type 60 Tools. The movements are hydraulically controlled, the chain is controlled by a hydraulic motor. The movement and the positioning operations are controlled by sensors connected to the PLC of the machine; this system has an automatic unlock and self-referential instruction M in case of malfunction. AC in electrical cabinet Thermal capacity 13.000 BTU/hr Exhaustion Unit with oil separator Power 4400kW Flow 4600 m3/hr FAGOR Remote handwheel FAGOR Cinematic Calibration Software FAGOR Dynamic Machining Process DAPI - Drilling Adaptive Process Intelligence When reaching intersection points the machine will automatically adjust the feed and rpms until all controlled parameters are stable again.This software application can be programmed to provide warnings when vibration or axial load level goes above the predefined set point.This feature can also be used to program the machine to automatically change the tool (by a twin tool) when the predefined set point vibration level is reached (usually by tool wear).